Cod 3921.19.00 — Din alte materiale plastice

EN: Of other plastics

Ierarhia completă: MATERIALE PLASTICE ȘI ARTICOLE DIN MATERIAL PLASTIC > Alte plăci, foi, folii, pelicule și benzi din materiale plastice > Produse alveolare > Din alte materiale plastice · Taxă terți: 6,5

Taxă vamală țări terțe: 6.500 % (măsura TARIC 103, ERGA OMNES — informativ, la data generării; preferințele pe origine pot coborî cota)

Variante TARIC de 10 cifre

Preferințe tarifare pe origine: 59 origini/grupuri au cote preferențiale la acest cod — calculează cu țara ta de origine.

Regulamente UE de clasificare aplicabile

• Reg. UE 314/90 clasifică aici: Cellular sheet consisting of approximately 60 % ethylene-vinyl acetate copolymer (saturated product) and 40 % fillers and pigments. The sheet is rectangular in shape and may vary in thickness from 4 mm to 16 mm
• Reg. UE 201/98 clasifică aici: Microporous polytetrafluoroethylene foil, in the form of rectangles. The product is put up in sterile packaging and used in surgical operations to repair local lesions or separate organs to prevent them from fusing together. It must sometimes be cut to size before use.
• Reg. UE 739/2006 clasifică aici: Plates of microporous cellular plastics, of ethylene-vinyl acetate copolymer, cut into rectangles (dimensions 15,5 × 10,5 × 0,75 cm) but not further worked. The plates are destined to be cut into smaller pieces and inserted into stamps, where they are used as an ink reservoir.

Exemple de produse clasificate la această subpoziție (392119)

Din decizii vamale publice (SUA/UE/UK), la nivelul primelor 6 cifre — armonizate internațional.

• Sheets of closed-cell silicone foam with: -a thickness of 2,0 mm or more but not more than 4,8 mm, -a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518) -a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149)
• Strip of microporous polytetrafluoroethylene on a support of a non-woven -wound on a roll on a core of 3 inches, -with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm for use in the manufacture of filters for kidney dialysis equipment and intravenous application
• Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 μm or more but not more than 36 μm,
• Blocks with cellular structure, containing by weight: -|polyamide-6|or poly(epoxy anhydride) -|7|% or more but not more than 9|% of polytetrafluorethylene if present -|10|% or more but not more than 25|% of inorganic fillers
• Film of polyethersulfone, of a thickness of not more than 200|µm
• Microporous polytetrafluoroethylene foil, in the form of rectangles. The product is put up in sterile packaging and used in surgical operations to repair local lesions or separate organs to prevent them from fusing together. It must sometimes be cut to size before use.
• Plates of microporous cellular plastics, of ethylene-vinyl acetate copolymer, cut into rectangles (dimensions 15,5 × 10,5 × 0,75 cm) but not further worked. The plates are destined to be cut into smaller pieces and inserted into stamps, where they are used as an ink reservoir.
• Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers
• The tariff classification of epoxy resin sheets or blocksfrom England.
• The tariff classification of ethylene vinyl acetate (EVA) sheets from China or Taiwan.

Coduri învecinate

• 3921.11.00 — Din polimeri de stiren
• 3921.12.00 — Din polimeri de clorură de vinil
• 3921.14.00 — Din celuloză regenerată

Întrebări frecvente

Există un regulament UE care lămurește încadrarea?

Da — Reg. UE 314/90 clasifică explicit un produs la acest cod (vezi secțiunea de regulamente).