Cod 3920.62.12 — Pelicule de poli(etilen tereftalat), cu grosimea de minimum 72 de microni, dar de maximum 79 de microni, pentru producerea discurilor magnetice flexibile
EN: Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks
Ierarhia completă: MATERIALE PLASTICE ȘI ARTICOLE DIN MATERIAL PLASTIC > Alte plăci, foi, folii, pelicule și benzi, din materiale plastice nealveolare, neranforsate, nestratificate, neasociate cu alte materiale, neprevăzute cu un suport > Din policarbonați, din rășini alchidice, din poliesteri alilici sau din alți poliesteri > Din poli(etilen tereftalat) > Cu grosime de maximum 0,35 mm > Pelicule de poli(etilen tereftalat), cu grosimea de minimum 72 de microni, dar de maximum 79 de microni, pentru producerea discurilor magnetice flexibile · Taxă terți: scutire
Preferințe tarifare pe origine: 56 origini/grupuri au cote preferențiale la acest cod — calculează cu țara ta de origine.
Exemple de produse clasificate la această subpoziție (392062)
Din decizii vamale publice (SUA/UE/UK), la nivelul primelor 6 cifre — armonizate internațional.
- Of poly(ethylene terephthalate)
- Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
- Of a thickness not exceeding 0,35|mm - Other
- Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm
- Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side
- Poly(ethylene terephthalate) film, of a thickness of not more than 12|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35|nm
- Sheets or rolls of poly(ethylene terephthalate): -|coated on both sides with a layer of epoxy acrylic resin, -|of a total thickness of 37|μm (±|3|μm)
- Poly (ethylene terephtalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
- Of a thickness not exceeding 0,35|mm - Other - Other
- Of a thickness exceeding 0,35|mm
Coduri învecinate
- 3920.62.19 — Altele
- 3920.62.90 — Cu grosime de peste 0,35 mm